RAPID CONFIGURATION191ADVANCED READER CONFIGURATIONFor further details on advanced product configuration, refer to the VisiSet™ Help On-Line.The following are alternative or advanced reader configuration methods:Advanced Configuration Using VisiSet™Advanced configuration can be performed through the VisiSet™ program by selectingDevice> Get Configuration From Temporary Memory to open the Parameter Setup window inoff-line mode. Advanced configuration is addressed to expert users being able to complete adetailed reader configuration. The desired parameters can be defined in the various foldersof the Parameter Setup window and then sent to the reader memory (either Temporary orPermanent):Figure 12 - VisiSet™ Parameter Setup WindowHost Mode ProgrammingThe reader can also be configured from a host computer using the Host Mode programmingprocedure, by commands via the serial interface. See the Host Mode Programming file onthe Mini-DVD.Alternative LayoutsIf you need to install an Ethernet network, ID-NET™ network, or Fieldbus network, refer tothe Matrix 300™ Reference Manual.The reader can also be setup for alternative layouts by reading programming barcodes. Seethe "Setup Procedure Using Programming Barcodes" printable from the Mini-DVD.
