260 PowerScan™ PD9130/PBT9100/PM9100CONFIGURE ACTIONS FOR FUNCTION KEYSEach of the function keys can be programmed to perform a user-assignedfunction. This is done by associating a function key with either a predefinedcommand or your own custom string. See the Define Strings on page265command to define customized strings.Each function key has an associated label which shows in the display whenactive. The default labels are shown in the table below. To program thefunction key labels, see Set String ID on page 266.The following table shows the list of predefined commands and availablestrings.Table 30. Keyboard ProgrammingCMD_ID Name Function Default Label 16K 4K0 Not configuredNot configured action.If a key must be kept enabled but isn’trequired in normal mode , this function can beselected to keep it ineffective. Whenever anunconfigured function key is pressed, an errormessage appears on the display and an errorbeep is emitted.>1 Enter CMD Same as ENTER_KEY. Ent2 String 1 Display and transmit string 1. S1T 3 String 2 Display and transmit string 2. S2T4 String 3 Display and transmit string 3. S3T 5 String 4 Display and transmit string 4. S4T6 String 5 Display and transmit string 5. S5T 7 Backlight CMD Toggle backlight on/off. Blt8 Clear CMD Clears the screen CLR 9 BackspaceCMD Same as Backspace key. A RecallIf pressed once, it recalls the last code sentout.If pressed twice, resends the last code.Rcl B Show Date/Time Display the internal date, time. TimC Scroll Up Scroll up display content by row UpD Scroll Down Scroll down display content by row DwnE Dot char Display dot [.] char [.] F Dynamic Quantity Dynamic Quantity Code function Qty
