LED and Beeper IndicationsProduct Reference Guide 321LED and Beeper IndicationsThe reader’s beeper sounds and its LED illuminates to indicate various func-tions or errors on the reader. An optional “Green Spot” also performs usefulfunctions. The tables below list these indications. One exception to thebehaviors listed in the tables is that the reader’s functions are programma-ble, and may or may not be turned on. For example, certain indications suchas the power-up beep can be disabled using programming bar code labels.Table 50.INDICATION DESCRIPTION LED BEEPERPower-upBeepThe reader is in the pro-cess of powering-up.Reader beeps fourtimes at highest fre-quency and volumeupon power-up.Good ReadBeepA label has been suc-cessfully scanned bythe reader.LED behavior forthis indication isconfigurable viathe feature “GoodRead: When toIndicate”The reader will beeponce at current fre-quency, volume, tonalsetting and durationupon a successful labelscan.Green Spotaa. Except when in sleep mode or when a Good Read LED Duration other than 00 is selectedflashesmomentarilyUpon successful read ofa label, the softwareturns the green spot onfor the time specified bythe configured value.N/A N/ALED and Beeper IndicationsTable 51Programming Mode - The following indications ONLY occur when the reader is in Pro-gramming Mode.INDICATION DESCRIPTION LED BEEPERLabel Program-ming Mode EntryA valid programminglabel has been scanned.LED blinks con-tinuouslyReader soundsfour low frequencybeeps.Label Program-ming Mode Rejec-tion of LabelA label has been rejected. N/AReader soundsthree times at low-est frequency ¤t volume.Label Program-ming Mode Accep-tance of PartialLabelIn cases where multiplelabels must be scannedto program one feature,this indication acknowl-edges each portion as it issuccessfully scanned.N/AReader sounds oneshort beep at high-est frequency ¤t volume.. Programming Mode Indications
