Datalogic PowerScan BT8300 Product Reference Manual

Also see for PowerScan BT8300 Family: Quick reference guide Guide

Contents

Datalogic PowerScan BT8300 Product Reference Manual Manual pdf 136 page image

POWERSCAN™ BT8300130 PowerScan™ BT8300 Family5.3 Data FormatFor an overview of Message Formatting see Chapter 6.5.3.1 Header/Terminator SelectionThe header/terminator selection is not effected by the reading of the restore default code. In fact, when the PowerScanBT8300 connects with the BC 8030-BT, cradle header and terminator default values depend on the interface selection: RS-232: no header, terminator CR-LF WEDGE: no header, terminator ENTERWhen the PowerScan BT8300 connects with a Bluetooth-Enabled PC, the reader header and terminator default values willbe: SPP Profile: no header, terminator CR-LF HID Profile: no header, terminator ENTERWhen the PowerScan BT8300 connects with the BC 8030-BT the default values are usually restored through the readingof RS-232 or WEDGE interface selection code. However, if the PowerScan BT8300 is connected with a Bluetooth-Enabled PC it will NOT reset to default value when switched between Communication Types. In other words, thePowerScan BT8300 can remember the setting of TERMINATOR. See chapter 2.For the WEDGE interface, the following extended keyboard values can also be configured:EXTENDED KEYBOARD TO HEX CONVERSION TABLEIBM ATIBM 3153APPLE ADBIBM XT IBM 31xx, 32xx,34xx, 37xxWyseDigitalHEX KEY KEY KEY KEY83 ENTER ENTER FIELD EXIT RETURN84 TAB TAB TAB TAB85 F1 F1 F1 F186 F2 F2 F2 F287 F3 F3 F3 F388 F4 F4 F4 F489 F5 F5 F5 F58A F6 F6 F6 F68B F7 F7 F7 F78C F8 F8 F8 F88D F9 F9 F9 F98E F10 F10 F10 F108F F11 ESC F11 F1190 F12 BACKSPACE F12 F1291 HOME HOME ENTER F1392 END END RESET F1493 PG UP PG UP INSERT F1594 PG DOWN PG DOWN DELETE F1695   FIELD - UP96   FIELD + DOWN97   ENTER (Paddle) LEFT98   PRINT RIGHT99 ESC ESC ESC9A CTRL (Right) CTRL (Right) CTRL (Right)9B Euro Space Space SpaceFor all devices using IBM AT (compatible) Wedge or USB-KBD interfaces, all values from 9C to FE send the relative simulated keypresswhen available or else the relative ALT-Mode sequence. See the Hex to Character Conversion Table in Appendix C.For all devices using other Wedge interfaces, all values from 9C to FE send the Space character.