Datalogic PowerScan BT8300 Product Reference Manual

Also see for PowerScan BT8300 Family: Quick reference guide Guide

Contents

Datalogic PowerScan BT8300 Product Reference Manual Manual pdf 40 page image

Enter Configuration Exit and Save ConfigurationÌ$+;Î WEDGE Ì$-?Î34 PowerScan™ BT8300 FamilyINTER-CODE DELAYdelay between codes transmitted to HostÌFG.ÎRead 2 numbers from the table where:00 = DELAY disabled01-99 = DELAY from 1 to 99 seconds delay disabledKEYBOARD SETTINGALPHANUMERIC KEYBOARD SETTINGThe device (reader or cradle) can be used with terminals or PCs with various keyboard types and nationalities through a simple keyboardsetting procedure.The type of computer or terminal must be selected before activating the keyboard setting command.Keyboard setting consists of communicating to the device how to send data corresponding to the keyboard used in the application. Thekeys must be set in a specific order.Press and release a key to set it.Some characters may require more than one key pressed simultaneously during normal use (refer to the manual of your PC or terminalfor keyboard use). The exact sequence must be indicated to the reader in this case pressing and releasing the different keys.Example:If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the character "$" to the video, to set the "$", pressand release "Shift" then press and release "4".Each pressed and released key must generate an acoustic signal on the device; otherwise repress the key. Never press morethan one key at the same time, even if this corresponds to the normal use of your keyboard.Press "Backspace" to correct a wrong key entry. In this case the device emits 2 beeps.NOTE: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting procedure. "SHIFT" must be repressed for eachcharacter and cannot be substituted by "CAPS LOCK".setting the alphanumeric keyboardÌFB0TÎRead the code above.Press the keys shown in the following table according to their numerical order.Some ASCII characters may be missing as this depends on the type of keyboard: these are generally particular characters relative to thevarious national symbologies. In this case: The first 4 characters (Shift, Alt, Ctrl, and Backspace) can only be substituted with keys not used, or substituted with eachother. characters can be substituted with other single symbols (e.g. "SPACE") even if not included in the barcode set used. characters can be substituted with others corresponding to your keyboard.The device signals the end of the procedure with 2 beeps indicating the keys have been registered.