Datalogic PowerScan BT8300 Product Reference Manual

Also see for PowerScan BT8300 Family: Quick reference guide Guide

Contents

Datalogic PowerScan BT8300 Product Reference Manual Manual pdf 17 page image

CONFIGURATIONProduct Reference Guide 114 CONFIGURATION4.1 Configuration Methods4.1.1 Reading Configuration BarcodesThis manual can be used for complete setup and configuration of your reader by following the setup procedures in thischapter (see par. 4.2 for an overview).If you wish to change the default settings, this manual provides complete configuration of your reader in an easy way.To configure your reader:1. Open the folded page in Appendix C with the hex-numeric table and keep it open during the device configuration.2. Read the Enter Configuration code ONCE, available at the top of each page of configuration.3. Modify the desired parameters in one or more sections following the procedures given for each group.4. Read the Exit and Save Configuration code ONCE, available at the top of each page of configuration.Reference notes describing the operation of the more complex parameters are given in chapter 1.4.1.2 Using Datalogic Aladdin™Datalogic Aladdin™ is a multi-platform utility program providing a quick and user-friendly configuration method via the RS-232/USB-COM interface.It also allows upgrading the software of the connected device (see the Datalogic Aladdin™ Help On-Line for more details).4.1.3 Copy CommandA previously configured device (Master), can be used to send its configuration directly to other devices of the same type(Slaves). The particular procedure for each device is given in par. 5.14.4.1.4 Sending Configuration Strings from HostAn alternative configuration method is provided in Appendix A using the RS-232 interface. This method is particularlyuseful when many devices need to be configured with the same settings. Batch files containing the desired parametersettings can be prepared to configure devices quickly and easily.4.2 Setup Procedures4.2.1 Restore PowerScan BT 8300 DefaultBefore starting configuration and every time you want to restore factory settings, read the label below. Please note that thedefault mode on PowerScan BT8300 is Handheld - Cradle communication:Restore PowerScan BT8300 Default