Datalogic PowerScan D8330 Reference Manual

Also see for PowerScan D8330: Reference manual Quick reference guide Quick reference guide

Contents

Datalogic PowerScan D8330 Reference Manual Manual pdf 19 page image

INSTALLATION112.9 POWERSCAN® M8300 BATTERY MAINTENANCE2.9.1 Battery ChargingOnce the system is connected and powered, you can place the PowerScan® M8300into the cradle to charge the battery.When the reader is correctly inserted in the cradle, the "Reader" red LED on the cradlegoes on to indicate that the battery is charging. The "Reader" green LED on the cradlegoes on when the battery is completely charged.2.9.2 Replacing PowerScan® M8300 BatteriesTo change the batteries in your PowerScan® M8300 scanner, press the black buttonor unscrew the fixing screw on the handle cover and extract the battery pack from thereader handle.When the batteries are extracted from the scanner, the timermaintains the current hour and date for about 1 minute.NOTEReplace the old battery pack with a new one by inserting it within the reader handleand pushing it until it clicks.Do not incinerate, disassemble, short terminals or expose tohigh temperature. Risk of fire, explosion. Use specifiedcharger only. Risk of explosion if the battery is replaced byan incorrect type. Dispose of the batteries as required by therelevant laws in force.WARNING12