POWERSCAN® D8330/M8300404.10 CHANGING DEFAULT SETTINGSOnce your reader is setup, you can change the default parameters to meet yourapplication needs. Refer to the preceding paragraphs for initial configuration in orderto set the default values and select the interface for your application.In this manual, the configuration parameters are divided into logical groups making iteasy to find the desired function based on its reference group.The first four groups are for Standard Interface parameter configuration for allPowerScan ® D8330 series readers and PowerScan ® M8300/BC-80X0 Stand-aloneconfigurations only:RS-232USBWEDGEPEN EMULATIONNETWORK PARAMETERS are available only for BC-8060 Network configurations.The following parameter groups are common to all interface applications:DATA FORMAT parameters regard the messages sent to the Host system for allinterfaces except Pen Emulation.POWER SAVE manages overall current consumption in the reading device.READING PARAMETERS control various operating modes and indicator statusfunctioning.DECODING PARAMETERS maintain correct barcode decoding in certain specialreading conditions.CODE SELECTION parameters allow configuration of a personalized mix of codes,code families and their options.ADVANCED FORMATTING PARAMETERS allow code concatenation andadvanced formatting of messages towards the Host. It cannot be used with PenEmulation connections.RADIO PARAMETERS (M8300 series only) allow configuration of radio controlparameters.DISPLAY PARAMETERS (some M8300 series models only) allow configuration ofreader display parameters.
