Datalogic PowerScan PD9530 Product Reference Manual

Also see for PowerScan PD9530: Product reference guide Product reference guide Product reference guide Product reference guide Quick reference guide

Contents

Datalogic PowerScan PD9530 Product Reference Manual Manual pdf 195 page image

2D Global Features Enter/Exit Programming ModeProduct Reference Guide 193QR Code Set Length 2This feature specifies one of the bar code lengths for QR Code Length Control. Length 2 is themaximum label length if in Variable Length Mode, or the second fixed length if in FixedLength Mode. Characters can be set from 0001 to 7,089 characters in increments of 0001(pad with zeroes).See page 216 for detailed instructions on setting this feature.$CQRL2Select QR Code Length 2 SettingTo configure this feature, scan the ENTER/EXIT PRO-GRAMMING MODE bar code above, then the bar codeat left followed by the digits from the Alphanumericcharacters in Appendix D, Keypad representing yourdesired character(s). End by scanning the ENTER/EXITbar code again.Make a mistake? Scan the CANCEL bar code to abort andnot save the entry string. You can then start again at thebeginning.~CANCELDEFAULT Length 2 is 7,089 CharactersMICRO QR CODEMicro QR Code Enable/DisableEnables/disables the ability of the reader to decode Micro QR Code labelsDEFAULTMQEN00Micro QR Code = DisableMQEN01Micro QR Code = Enable.