Page 16 iBootBar V1.5xCommand Line InterfaceThe Command Line Interface provides complete setup of all function of the iBootBar. Access the CLI either via the network interface using Telnet, or via themodem or serial port using a terminal emulation program. Some commands of the CLI require administrative rights. These are indicated in the table below.Outlet CommandsCommand Description Admin Fact Defget outlets Returns the status of ALL the outlets the user has rights to.Displays all devices and outlets in a cluster configuration.Noget outlet <1‐8> Returns the status of the iBootBar. This command is for iBootBarsnot used in a cluster configuration. If used in a cluster, it is thesame as device #1. The user must have rights to the selectedoutlet.Noset outlet <1‐8> Sets the selected outlet to the selected state. The user must haverights to the selected outlet. This command is for iBootBars notused in a cluster configuration. If used in a cluster, it is the sameas device #1Noget device <#1‐#16/devname> outlet <1‐8> Returns the status of the select outlet on the selected iBootBar.Device is either the number of the device <#1 to #16> or the nameof the device, as set. Number sign (#) required. The user musthave rights to the selected outlet.Noset device <#1‐#16/devname> outlet <1‐8> Sets the selected outlet on the selected iBootBar to the selectedstate. The user must have rights to the selected outlet.Noset device <#1‐#16/devname> outlet <1‐8> name Sets the name of the selected outlet of the selected iBootBar. 20characters max.Yes Outlet <#>get device <#1‐#16/devname> outlet <1‐8> initial.state Get or set the initial state of the selected outlet of the currentlyselected iBootBar. Initial state is the condition of the outlet whenthe iBootBar is powered up.Yes Lastset device <#1‐#16/devname> outlet <1‐8> initial.state