iBootBar V1.5x Page 31SNMPUp to four SNMP managers can be set. Each manager will receive Trap notifications for outlet changes, autoping andcurrent alarms. Set the SNMP manager IP addresses using the set snmp ipaddress decimal> command.Enable or Disable SNMP for any manager with the set snmp enable command. The MIB is available on thedistribution CD, or at http://Dataprobe.com/ibootbartools.htmlThe iBootBar also supports the following elements of MIB-IImgmt [1.3.6.1.2]|-> [ 1] -BR- mib-2|-> [ 1] -BR- system|-> [ 1] *RO* DisplayString sysDescr-> [ 2] *RO* OBJECT IDENTIFIER sysObjectID-> [ 3] *RO* TimeTicks sysUpTime-> [ 4] *RW* DisplayString sysContact Truncated to 128 Char-> [ 5] *RW* DisplayString sysName Truncated to 128 Char-> [ 6] *RW* DisplayString sysLocation Truncated to 128 Char-> [ 7] *RO* INTEGER sysServicesFirmware UpgradesThe iBootBar can be upgraded via the network if the upload feature has been enabled using the set upload enable yescommand on the console interface. To upgrade the iBootBar download the latest version of the firmware and upgradeutility from the Dataprobe website. http://Dataprobe.com/ibootbartools.htmlPassword RecoveryHolding the reset button on the front panel of the iBootBar for 5 seconds or longer will initiate a password recoverymode. Once the reset button is released, the user has 30 seconds to log in to the CLI using the username admin andpassword admin. Upon accessing the CLI, change the username and password for User 1 as desired.
