Datasat RS20i Installation And Operating Manual
Also see for RS20i: Installation and operating guide
                                                                                                                                                         | |
Contents
| 
RS20i Installation and Operating Guide Page 38RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.024.2.2 Overview, Creating an Input PresetThis is an overall summary of the procedure for creating an audio input. Each is described in more detaillater in this section.Assign Input Preset name. The RS20i comes with some Input Presets already installed which havegeneral names reflecting the input source. These Input Presets should be renamed to describe specificinstallation inputs and/or configuration. Additional Input Presets can be created by copying an existingInput Preset, or by creating a new Input Preset from a template. Unused Input Presets may be deleted.All of these functions are available in the Input Setup screen.Input Source. Define the physical input connector in the Input Source screen.Input Options. Set Global Delay, Surround Decoder, and other options for the Input Preset. These are allfound under the Input Options selection.Output Preset. Select the Output Preset desired for the Input Preset. This is set by entering the OutputPreset Setup screen and selecting the Current Output Preset using the list selection. The Output Presetcontains the channel names, Bass Management, channel delays, and crossover settings. See 4.5 OutputPreset on page 64 to create or configure an output preset.EQ Setup. Select the EQ Setup desired for the Input Preset. This is set by entering the Audio EQ Setupscreen and selecting the Current Audio EQ Setup using the list selection. The Audio EQ contains theDirac Coefficients, 3rd Octave EQ, Parametric EQ, etc. See 4.4 Audio EQ Setup on page 53 to create orconfigure an EQ Setup.Assign Buttons. You can assign up to eight Input Preset buttons on the Home screen to provide quickaccess to select an Input Preset. Optionally, one of the buttons can be assigned to have a pop-up whereup to 20 Inputs can be selected. This function is available in the Assign Buttons screen.4.3 Input Preset ScreenThe Input Preset screen is the base screen for creating and configuring an Input Preset. To access thisscreen:Setup > InputsFigure 18. Input Preset ScreenFrom the Input Preset screen, you can configure or select the following: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine