6-1 Installing Disk DrivesThree 5.25” floppy/hard disk drives and two 3.5” floppy/hard disk drivesmay be installed in the system unit. Installation of a hard disk isessentially the same as that for a floppy disk.You may at sometime want to add to or exchange your floppy or harddisk drives. Follow the instructions below to do so.Be certain to refer to the manuals for both the disk drive and thecontroller card for any additional specific information regarding themthat may be of importance.5.25” Disk DrivesTo install or remove 5.25” disk drives, follow the steps below:• Open the system unit case as described on Figure 2-16.• Screw the metal guides to the disk drive as shown below:Figure 6-1: Installing a 5.25” Disk DriveSlide the back end of the disk drive first into the disk drivebay.2 Chapter 6: Appendix
