Datavideo HDR-70 Instruction Manual

Also see for HDR-70: Quick start guide Brochure & specs

Datavideo HDR-70 Instruction Manual Manual pdf 11 page image

HD / SD Recorder HDR-7011Menu Overview and Menu NavigationYour HDR unit is a menu driven unit; there are several menus which are used to initially set up the unit. Themenu settings are non-volatile, so they are stored even when the unit is switched off. Many of these settings,such as file type and bit rate, may only need to be set once. We will look at each menu in more detail, buthere is a quick overview of them.MAIN MENU SUB MENUSTOOLERASE THIS BIN Erases the currently selected recording bin.FORMAT MEDIA Erases the whole contents of the drive and reformats it.UPDATE FIRMWARE See page 23 for further details on the update process.UNLOCK MEDIA Removes the write protection from the HE-1 drive.FIRMWARE REVISION Displays the current firmware detail.SETUPRECORD SETUP See page 12 for further detailsPLAY SETUP See page 17 for further detailsSYSTEM SETUP See page 18 for further detailsSAVE SETUPRECALL SETUPSTATUSLCD displays current recording bit rate and video formatThe following front panel buttons are used to navigate the displayed menus and to change settings.Menu Button.This calls up the Menu Display which is navigated using thePrevious and Next Buttons.Previous / Next Buttons.These buttons navigate between menu options or allow you tochoose an option value. A selected option will be confirmed by anasterisk [*] character next to it. Chosen settings are also confirmed inthe status menu.Menu button also acts as an exit button.Press the Menu button once to exit the current option selection.Press the Menu button again to exit the current menu level.If there are no higher level menus then you will return to the Clip Status Display.