44Fig. 6.2REPLACING THE OVEN LAMPSWARNING: Ensure the appliance is switched off before replacing the lamp to avoidthe possibility of electric shock.■ Let the oven oven cavities and the heating elements to cool down;■ Switch off the electrical supply;TOP RIGHT LAMP (TOP AND BOTTOM MAIN OVEN):■ Remove the protective cover C (fig. 6.2);■ Unscrew and replace the bulb B with a new one suitable for high tem-peratures (300°C) having the following specifications: 230-240V 50 Hz,E14 and same power (check watt power as stamped in the bulbitself) of the replaced bulb.■ Refit the protective cover;LEFT LAMP (BOTTOM MAIN OVEN ONLY):■ Remove the left wire rack and the side catalytic panel by unscrewingthe fixing screws.■ Press down from the top the protective cover A (fig. 6.2) and removeit by rotating on the lower side. IMPORTANT: never use screwdriversor other utensils to remove the cover A. This could damage the enamelof the oven or the lampholder. Operate only by hands.■ Unscrew and replace the bulb B with a new one suitable for high temperatures(300°C) having the following specifications: 230-240V 50 Hz, E14 and same power(check watt power as stamped in the bulb itself) of the replaced bulb.■ Refit the protective cover A operating in reverse order. ATTENTION: the notch in theinner edge of the cover must be oriented toward the lamp.■ Assemble the left wire rack and the side catalytic panel with the arrow up.Note: Oven bulb replacement is not covered by your guarantee.AB B C12AA