DeLonghi ECAM37X.95 Instructions For Use Manual

Also see for DINAMICA PLUS: Quick start guide Quick start guide Instructions for use Manual User manual

128.1 Filling and attaching the milk container1. Remove the lid (E2) (fig. 14);2. Fill the milk container (E3) with a sufficient quantity of milk,not exceeding the MAX level marked on the container (fig.15). Each mark on the side of the container corresponds toabout 100 ml of milk;Please note!• For a denser more even froth, you must use skimmed orpartially skimmed milk at refrigerator temperature (about5°C).• If "Energy Saving" mode is enabled, you may have to wait afew seconds before the beverage is delivered.3. Make sure the milk intake tube (E4) is correctly inserted inthe bottom of the milk container lid (fig. 16);4. Place the lid back on the milk container;5. Remove the hot water spout (D6);6. Attach the milk container (E) to the connection nozzle (A8)and push as far as it will go (fig. 17). The machine emits abeep (if the beep function is enabled);7. Place a sufficiently large cup under the coffee spouts (A9)and the frothed milk spout (E5). Adjust the length of themilk spout. To move it nearer the cup, simply pull it down-wards (fig. 18).8. Follow the instructions below for each function.8.2 Adjusting the amount of frothTurn the froth adjustment dial (E1) to adjust the amount of frothon the milk delivered while making cappuccinos and milk-basedcoffees.DialpositionDescription Recommended for…NO FROTH HOT MILK (not frothed) /CAFFELATTEMIN. FROTH latte macchiato/FLAT WHITEMAX. FROTH CAPPUCCINO / CAPPUCCI-NO+ / CAPPUCCINO MIX/ ESPRESSO MACCHIATO /HOT MILK (frothed)8.3 Making cappuccinos and milk-based coffeesautomatically1. Fill the milk container (E) and attach it as described above.2. Select the required beverage:• CAPPUCCINO• LATTE MACCHIATO• HOT MILK• CAPPUCCINO+• CAPPUCCINO MIX• CAFFELATTE• FLAT WHITE• ESPRESSO MACCHIATO3. A message on the display instructs you to turn the frothadjustment dial (E1) according to the froth required by theoriginal recipe. Turn the dial on the milk container lid.4. After a few seconds, preparation begins automatically andan image of the selected beverage appears on the display,together with a progress bar which gradually fills as prepa-ration progresses.Once the coffee has been delivered, the machine will be readyfor further use.Please note: general indications when preparing all milk-based beverages• : press to interrupt preparation completelyand go back to the homepage.• : press to interrupt milk or coffee delivery andmove on to the next delivery (if applicable) to complete thebeverage.• Preparation of each coffee can be customised (see sections"11. Customising the beverages " and "12. Memorisingyour own user profile").• Do not leave the milk container out of the refrigerator forlong periods. The warmer the milk (5°C is ideal), the poorerthe quality of froth produced.8.4 Cleaning the milk container after useEach time you use a milk function, "TURN MILK FROTH ADJUST-MENT DIAL" "TO CLEAN POSITION" appears on the display andthe milk frother lid must be cleaned:1. Leave the milk container (E) in the machine (you do notneed to empty it);2. Place a cup or other recipient under the frothed milk spout;3. Turn the froth adjustment dial (E1) to "CLEAN" (fig. 19)."CLEANING UNDERWAY" "RECIPIENT UNDER SPOUT" ap-pears on the display together with a bar which graduallyfills as cleaning progresses (fig. 20). Steam mixed with hotwater comes out of the frothed milk spout. Cleaning stopsautomatically;4. Turn the dial back to one of the froth selections;5. Remove the milk container and always clean the hot waterconnection nozzle (A8) with a sponge (fig. 21).Please note!• To prepare a number of cappuccinos and milk based cof-fees, clean the milk container after you have preparedthe last beverage only. To proceed with making the nextbeverages, when the CLEAN message is displayed, press.