button to cancel the operation);6. Press the button to exit the menu.Resetting factory default values(reset)This function resets the entire menu with thedefault values (except the language, whichremains as set).1. Press the P button to enter the menu;2. Turn the selection knob until "Default Values"is displayed;3. Press the button;4. The message "Confirm?" is displayed.5. Press the button to confirm and exit(or the button to cancel the opera-tion);Installing the filterCertain models are provided with a water softenerfilter (alternatively it can be purchasedseparately from an authorised technicalassistance centre).To install the filter, proceed as follows:1. Insert the filter in the water tank asfar as it will go (see figurealongside).When you install the filter, youmust notify the appliance of itspresence.2. Press the P button to enterthe menu;3. Turn the selection knob until "Install Filter" isdisplayed;4. Press the button;5. The message "Confirm?" is displayed.6. Press the button to confirm (an aste-risk appears at the top right of the display);7. Press the button to exit the menu.Replacing the filter ("Reset waterfilter")When the red light comes on, the filter mustbe replaced:1. Extract the exhausted filter and replace with anew one;2. Press the P button to enter the menu;3. Turn the selection knob until "Reset WaterFilter" is displayed;4. Press the button;5. The message "Confirm?" is now displayed.6. Press the button to confirm (or thebutton to cancel the operation);7. Press the button to exit the menu.Removing the filterIf you want to use the appliance without a filter,you must remove it and notify the appliance of itsremoval as follows:1. Press the P button to enter the menu;2. Turn the selection knob until "Install Filter" isdisplayed;3. Press the button;4. The message "Confirm?" is displayed.5. Press the button;6. When the asterisk has disappeared from thetop right of the display, press to exitthe menu.Important! If this is not done, the appliancecould become clogged with limescale.Important! If this is not done, theappliance could become clogged with limescale.Statistics function1. Press the P button to enter the menu;2. Turn the selection knob until "Statistics" isdisplayed;3. Press the button;4. Turn the selection knob to verify:- how many coffees have been made;- how many cappuccinos have been made;- how many times the machine has been desca-led;- the total number of litres of water run off;- how many times the water filter has beenreplaced.5. Press the button twice to exit themenu.32