DeLonghi PRO 1860X Instructions For Use Manual

Contents

DeLonghi PRO 1860X Instructions For Use Manual Manual pdf 5 page image

18the whole plate. You can choose betweenthe two functions simply by changing theposition of the selector (fig. 6).• The iron can be rested in an upright position(fig. 7). However, make sure the surface isflat to avoid the iron falling over.Using the “domestic” iron• After turning the appliance on as describedabove, wait for the “steam ready” light Y togo off.• To discharge steam, press the steam but-ton U under the handgrip of the iron. Somemodels also have a steam button Z1 on thehandgrip.• Some models have an “auto-off” safety devi-ce which turns the iron off if left unused for30 seconds in the horizontal position or 8minutes in the upright position (fig. 8).When the device is active, light Z flashes.This light is on steadily during normal useand indicates that the iron is plugged intothe mains.To resume ironing, shake the iron slightlyforwards until light Z comes on steadily.Wait for light Y to go off before dischargingsteam.• Some models have a “steam burst” buttonZ1. This function can be used when the ap-pliance is ready to discharge steam.The appliance is set for an interval of 30 se-conds between consecutive bursts of steamto avoid water leaking from the plate.• The iron can be rested in an upright position.Make sure the surface is flat to avoid the ironfalling over accidentally. To rest the iron cor-rectly, fix the steam/cable tube on the rightor left by pushing it as far as it will go until itclicks into place.• Safe transport: the iron has a locking systemto avoid it being accidently dropped duringtransport or when stored after use.To lock the iron in position, insert the tip inthe housing on the iron rest and press theiron downwards until it clicks into place (fig.9).To release the iron, press the buttonZ3 and remove the iron. While ironing, restthe iron as shown in fig. 10 (without lockingin place).Important!Never move or lift the appliance using the iron asa carrying handle.Adjusting the thermostatTurn the thermostat knob to set themost suitable temperature for thetype of fabric to be ironed.For steam ironing, the temperaturemust be within the steam sectorshown alongside.Below is a brief guide to help you choose thebest temperature for the type of fabric to be iro-ned.l Acetate, acrylic, nylon, polyester, rayonl l Silk, wooll l l Linen, cottonSteam regulatorThe steam regulation knob S enables the quanti-ty of steam to be increased or decreased accor-ding to the fabric being ironed.When you turn the iron on, you are recommen-ded to turn the steam regulation knob to the ma-ximum steam position.The corresponding light comes on.Topping up the tank with waterWhen the water runs out, the light comeson.When this light comes on, proceed as describedin the section “Filling the tank”.Dry ironing• To dry iron, turn the appliance on by pressingthe button Q (certain models only).In models with a single button, press thebutton R and do not press the steam but-ton.• Turn the thermostat knob to select the mostsuitable temperature for the garments being

/ 8

Related manuals for DeLonghi PRO 1860X