DeLonghi Pinguino T90 User Manual

Also see for Pinguino T100ECO: Instructions User manual

Contents

24O p e r a t i o nSETTING THE TIMERThe timer can be used to delay appliance start up or shut down.This avoids wasting electricity by optimising operating periods.To set, press the “+” (G) or “-” (O) button to increase or decrea-se by an hour at a time. When the buttons are held down formore than two seconds, the time runs rapidly up to a maximumof 24 hours.How to programme delayed start up• Plug the appliance into a mains socket and press the ON/OFFbutton (A), then select the required mode and operation(temperature, fan speed, etc).• Press the ON/OFF button (A) again to place the appliance instandby mode.• Press the timer button (L). The two centre segments flash onthe display.• Use the “+” (G) or “-” (O) buttons to set the number of hoursdelay before the appliance comes on.• The indicator light (H) flashes until the appliance starts up.• You can set the appliance to come on with a delay of up to24 hours.How to programme delayed shut down• Delayed shut down can be programmed in any operatingmode (air conditioning / superconditioning / dehumidifying /fan / air purifying).• Press the timer button (L). The two centre segments flash onthe display.• Use the “+” (G) or “-” (O) button to set the number of hoursdelay before the appliance goes off.• The indicator light (H) flashes until the appliance shuts down.At the set time, the air conditioning unit shuts down andremains in standby.GB-5751012500 14-04-2004 15:59 Pagina 24