DeLonghi Pinguino T90 User Manual

Also see for Pinguino T100ECO: Instructions User manual

Contents

21ENGLISHDescription of the control panelTHE CONTROL PANELA ON/OFF buttonB Mode selection buttonConditioning, BOOST (superconditioning), dehumidifying, fan.C Air conditioning mode indicator lightD BOOST (superconditioning) mode indicator lightE Dehumidifying mode indicator lightF Fan mode indicator light (air purifying in model T100ECO)G Increase temperature/humidity/ programmed operating time buttonH Timer in operation indicator lightI Display displays the temperature/humidity values set and the programmed operatingtimeL Timer buttonM Temperature displayN Humidity displayO Reduce temperature/humidity/programmed operating time buttonP/Q/R/S Fan speed and AUTO mode indicator lightsT Fan speed selection buttonU "SWING" button to move grille flaps (model T100ECO only)NB: The "SWING" button (U) moves the grille flaps to distribute the cool air uniformly in the room.When the button (U) is pressed and the flaps have begun moving alternately forwards andbackwards, pressing the button again will lock the flaps in their current position.Pressing the button again will restart the flaps moving forwards and backwards.When the appliance is turned off, they will close irrespective of their position.MODELS WITH REMOTE CONTROL UNIT (model T100ECO only)Operation- Pressing the ON/OFF button ( ) turns the appliance on or off.- Pressing the FAN button selects the required fan speed. Each time the FAN button is pressed,the speed of the fan rotates through the available options (Max, Min, Silent, Auto). On thecontrol panel, the LED corresponding to the selected speed lights up.- The SET buttons (+) and (-) increase or reduce temperature or humidity.The temperature or humidity set is displayed on the control panel.Each time the button is pressed, the appliance confirms the selection with a beep and the lighton the remote control unit comes on.NB: The remote control unit can be used for the following functions only: to turn the applianceon or off, vary fan speed and set temperature or humidity depending on the operating modeselected on the control panel. (see pages 22-23)Replacing the batteries• Remove the cover on the back of theremote control unit;• replace the flat batteries with two AAA 1.5V batteries, making sure they are in thecorrect position (see instructions inside thebattery compartment);• Replace the cover.SET+-FANFAN buttonSET + buttonSET - buttonON/OFF buttonIndicator lightGB-5751012500 14-04-2004 15:59 Pagina 21