22O p e r a t i o nTURNING THE APPLIANCE ONPlug into the mains.Two lines appear on the display indicating that the appliance isin standby.Press the ON/OFF button (A) (when turned on, the air conditio-ning unit starts operating in the same mode as when it was tur-ned off).Press the MODE (B) button until the indicator light correspondingto the required mode lights up:Indicator light C : Air-conditioning modeIndicator light D : BOOST mode (superconditioning)Indicator light E : Dehumidifying modeIndicator light F :FAN MODE (air purifying in model T100 ecoonly) (in model T100eco, when the selectionhas been made, the flaps will open at a pre-set angle. When the air conditioning unit isturned off, the flaps will reclose).AIR-CONDITIONING MODEIdeal for hot humid weather when you need to cool and dehu-midify the room.After selecting the air-conditioning mode, the indicator light (M)comes on. To set operation of the appliance correctly, press the“+” (G) or“-” (O) buttons until the required temperature isdisplayed.The most suitable temperature for the room during the summervaries from 24 to 27°C. You are recommended, however, not toset a temperature much below the external temperature.Then select the fan speed by pressing the "FAN" button (T) until the indi-cator light corresponding to the required fan speed lights up:MAX (S): the air conditioning unit operates at maximum to reachthe required temperature as rapidly as possible.MIN (R): reduces noise levels but still maintains a good level ofcomfortSILENT (Q):for silent operationAUTO (P): the appliance automatically selects the most suitablefan speed in relation to the temperature set on the digi-tal display.BOOST MODE (superconditioning)This is set in the same way as the "AIR-CONDITIONING" mode, butwith a boost, useful when you want to make a very hot roomcomfortable as rapidly as possible.25GB-5751012500 14-04-2004 15:59 Pagina 22