DeLuxe Stitcher M7 Series Operation And Maintenance Manual

Contents

DeLuxe Stitcher M7 Series Operation And Maintenance Manual Manual pdf 5 page image

The DeLuxe Stitcher M7 Stitcher Machine is a single-head stitcher designed toaccommodate both light and heavy-duty work, stitch both flat and saddle and is worldrenowned for its ability to reliably stitch any thickness of stock from 2 sheets to 7/8”(22.2mm).The recommended wire sizes to be used on the M7 are: 24 to 28 gauge round wire and20x24, 20x25 and 21x25 flat wire. These wire sizes can be used without changingany parts in the Stitcher head. However, for heavy flat work it is recommended thatthe special Flat Work Driver be substituted for the Standard Driver.The M7 is easily adjusted from saddle work to flat work by tilting the 5 1/2” (14cm)x 26” (66cm) work table. An adjustable work guide and adjustable work stopsareeasily attached to the work table and provide for accurate registering of flat workfor uniformly spacing the staples. In addition a work table extension is provided toaccommodate larger sizes of work to be stitched. The M7 is the most versatile of allsingle-head machines.The M7 is foot-switch operated and belt driven by a 1/2 HP motor, making possibleoperating speeds up to 125 stitches per minute. The motor is mounted on an adjustablebracket which can be raised or lowered to adjust driving belt tension. The machinedriving mechanism is thoroughly shielded, preventing the possibility of personalinjury.The M7 has a 14” (35.6cm) throat depth for both flat and saddle stitching. The worktable is approximately 34” (86.4cm) above the floor and there is approximately 1/8”(3mm) clearance between the top of the work to be stitched and the protective guardingaround the stitcher head.The M7 weighs 340 lbs. (154.5 kgs) net and the shipping weight is approximately 410lbs. (186.4 kgs). With the table installed, the M7 requires about 31” (78.8cm) x 35”(88.9cm) of floor space.Because of the length of the work table, the M7 must be secured to the floor to meetCE stability requirements. Sound level readings at the normal operator position areapproximately 70 dB.Introduction4