Dedicated Micros Dennard 2040 Menu System Manual

Also see for 2060: Operation manual Operation manual Quick start guide Installation manual System manual

Dedicated Micros Dennard 2040 Menu System Manual Manual pdf 17 page image

4.3 Supervisor MenuThe SUPERVISOR MENU allows the supervisor not only to duplicate the operator menu functions,but also to programme Preset positions (with their identifying title) and Tours. Additionally, cursorsetting and text positioning and selection are accessed here.The functions are split into a series of underlying menus in ‘layers’. When returning from mostunderlying menus, the overlying menu is re-presented. The functions which are less likely to beneeded lie deeper in the structure.The Supervisor Menu displays:4.3.1 Store/Edit PresetThe first option enables the supervisor to define a view (including pan, tilt and zoom settings) andstore it for future recall. Note that storing a Preset requires that the desired camera view is alreadyvisible when this screen is entered. Selecting this option calls up the following underlying screens.Selecting the preset number is achieved as with the previous numerical entry screens. When thenumber is accepted, a new display will allow the supervisor to give this position a name (such as‘Main Gate’ or ‘Front Door’) or use the default names stored in the dome software. The screen willprompt with:Edit Preset Text -YesNoPreset Number _ _ _0 1 2 3 4 5 6 7 8 9Accept EntryClear EntryReturn Without ChangeDelete PresetStore/Edit PresetStore/Edit TourAlarm SetupSupervisor OptionsChange PINPrivacy Zone SetupReturnExitDennard 2040 / 2060 Menu System Manual Page. 15