Defender SN502-4CH Instruction Manual

Also see for SN502-4CH: Instruction manual Quick start guide

Contents

Defender SN502-4CH Instruction Manual Manual pdf 63 page image

SN502-4CH60NETWORK GUIDETO VIEW DVR THROUGH HOST NAME1. Ensure that all your DYNDNS account information is entered into your DVR’s DDNS setup screen.2. Open Internet Explorer and type in your DVR’s host name that you created on your DYNDNS account.3. You will be prompted for a Password.Default Password: 1234564. Click OK and the DVR software and footage will appear.Note: If using a port other than 80, the port must be specified after your host nameLOGGING INTO SOFTWARE1. If you created a DYNDNS account, type in your account’s host name in Internet Explorer. If you didn’t create anaccount you can use your external IP address in Internet Explorer (if on a different computer) or your DVR’s internalIP address in Internet Explorer (if on a computer connected to the same router).2. Before you view the online software you are asked to login with a password, you can use the admin or userpassword and the footage will appear.3. The login screen also has the option to adjust which connection you are viewing the software with (internet orLAN). Leave this option set to Internet.4. Default Password:1234565. Once the password is inserted, select login and the DVR software and footage will appear.This is what the online viewing software will look like in live view: