Defender SN502-4CH Quick Start Manual

Also see for SN502-4CH: Instruction manual Instruction manual

Contents

Defender SN502-4CH Quick Start Manual Manual pdf 11 page image

SN502-4CH 11Viewing Your DVR on Your ComputerNow that the computer is prepared to install the necessary ActiveX controls you are ready to start viewing the DVR using your computer. Using Internet Explorer,type the IP address of the DVR into the address bar using the following format: http://192.168.0.108 and press ENTER.If the computer and the DVR are connected to the same router you can use the internal IP address to view the DVR. If the computer is not connected to the samerouter and is at a remote location you will need to use the external IP address for the DVR to view the DVR from that computer.NETWORKING GUIDELog in to the DVR (Using Internet Explorer):By default the DVR will require a user to input a password before being ableto view the DVR online. The default password for the web interface of theDVR is: 123456.Installing the ActiveX controls:There will be a yellow information bar that pops up below the address bar inInternet Explorer. Click on the yellow information bar and then select “Install ThisAdd-on for All Users on This Computer…”. Please be patient as the installationprocess can take 1-2 minutes.SN502-4CH QSG.indd 11 04/02/2010 1:14:07 PM