SN502-4CH 6GETTING STARTEDFor more information onthe function menu pleasesee Pg. 12 of the manual.When you access any sub-menu there are a few options that may beavailable on the bottom of the page.The options include:1. Default2. Apply3. ExitFor moreinformation on themain menu pleasesee Pg. 15 of themanualThe main menu can be accessed by pressing the menu button on thefront of the DVR or by selecting it from the function menu.To access the main menu with the mouse, right click and select mainmenu from the function menu. On the DVR front panel and remote,press the “menu” button.To select anything from the main menu, left click the mouse, press selecton the remote or press “enter” on the front of the DVR.MAIN MENUFor more information on thefunction menu please see Pg.12 of the manual.FUNCTION MENU1. By right clicking the mouse.To access items on this menuwith the mouse move the mousepointer over the option tohighlight it and left click. To exit,move the pointer off the menuand left click.2. Pressing select on the remote.To access items on this menu withthe remote, use the arrow keysto move and when the option ishighlighted, press select. To exit,press the menu button.3. Pressing the function buttonTo access items on this menuwith the front of the DVR use thenavigational key pad on the frontof the DVR to move and when theoption is highlighted, press enter.To exit, press the menu button.The Function Menu can be accessed 3different ways:Function MenuSN502-4CH QSG.indd 6 04/02/2010 1:14:05 PM