Defender SN502-4CH Quick Start Manual

Also see for SN502-4CH: Instruction manual Instruction manual

Contents

Defender SN502-4CH Quick Start Manual Manual pdf 4 page image

SN502-4CH 4BASIC SETUPCONNECTING A USB MOUSEIt is recommended to connect the includedUSB mouse before powering on the DVR. Thiswill speed up the initializing process as wellas make the DVR easier to use.1. Plug the USB connection on the mouseinto the top USB connection on the backof the DVR.Plug in BNC to RCA connector Plug RCA cable to BNCPOWERING ON DVR1. Insert the included power cord into theincluded power supply.2. Plug the power cord into a poweroutlet (surge protected power outletrecommended).3. Insert the power supply wire into the rearDC 12V port on the DVR.• After a few seconds the splash screenwill appear and the DVR will start up.Connect to a power sourceFor more information on basic setup please see Pg. 9-10 of manualCONNECTING A MONITOR1. Connect a BNC to RCA connector to the top VIDEO OUT connection on theback of the DVR.2. Plug the RCA cable into the BNC connector.3. Attach the other end of the RCA cable to a yellow RCA video input on yourTV/monitor.4. Switch the TV/Monitor source to view the DVR. (Consult the TV/Monitormanual for instructions on how to switch the video source)5. The bottom video out is for a second monitor. Plugging an RCA cable intothis video out would be the same as plugging it into the top video output.SN502-4CH QSG.indd 4 04/02/2010 1:14:04 PM