Dell 1130 Laser Mono Printer Troubleshooting Manual

Also see for 1130: Datasheet

Contents

Dell 1130 Laser Mono Printer Troubleshooting Manual Manual pdf 32 page image

1. Double-click the Unified Driver Configurator.2. Click Add Printer…3. The Add printer wizard window opens. Click Next.4. Select Network printer and click the Search button.5. The printer’s IP address and model name appears on list field.6. Select your machine and click Next.7. Input the printer description and Next8. When the add printer is done, click Finish.IPv6 ConfigurationTCP/IPv6 is supported properly only in Windows Vista or higher.If the IPv6 network seems not working, set all the network setting to the factory defaults and try again. (SeeRestoring factory default settings.)To use the IPv6 network environment, follow the next procedure to use the IPv6 address:The machine is provided with IPv6 feature on.1. Connect your machine to the network with a network cable.2. Turned on the machine.3. Print a Network Configuration Report from the machine’s control panel that will check IPv6 addresses.4. Select Start > Control Panel > Hardware and Sound > Printers > Add Printer.5. Click Add a local printer on the Add Printer windows.6. Follow the instruction on the window.If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.Printing network configuration reportYou can print a Network Configuration Report from the machine's control panel that will show the current machine’snetwork settings. This will help you to set up a network and troubleshooting problems.To print the report:In ready mode, press and hold the (cancel button) for about 5 seconds. You can find your machine’s MAC addressand IP address.For example:MAC Address : 00:15:99:41:A2:78IP Address : 192.0.0.192Setting IPv6 addressesMachine supports following IPv6 addresses for network printing and managements.Link-local Address: Self-configured local IPv6 address. (Address starts with FE80.)Stateless Address: Automatically configured IPv6 address by a network router.Stateful Address: IPv6 address configured by a DHCPv6 server.Manual Address: Manually configured IPv6 address by a user.Manual address configuration1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL. (See Using Embedded WebService (Dell 1130n only).)For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or clickGo.2. When the Embedded Web Service window opens, click Network Settings.3. Click TCP/IP.4. Enable the Manual Address In the TCP/IPv6 section.5. Select the Router Prefix and click the Add button, then the router prefix will automatically be entered into theaddress field.