Dell 1130 Laser Mono Printer Troubleshooting Manual

Also see for 1130: Datasheet

Contents

Dell 1130 Laser Mono Printer Troubleshooting Manual Manual pdf 7 page image

This could result in electric shock or fire.Call an electrician to change the electrical outlet, or thiscould result in electric shock.Be careful, the paper output area is hot.Burns could occur.Do not allow pets to chew on the AC power, telephone orPC interface cords.This could result in electric shock or fire and/or injury to yourpet.If the machine has been dropped, or if the cabinetappears damaged, unplug the machine from allinterface connections and request assistance fromqualified service personnel.Otherwise, this could result in electric shock or fire.If the machine does not operate properly after theseinstructions have been followed, unplug the machine from allinterface connections and request assistance from qualifiedservice personnel.Otherwise, this could result in electric shock or fire.If the machine exhibits a sudden and distinct changein performance, unplug the machine from all interfaceconnections and request assistance from qualifiedservice personnel.Otherwise, this could result in electric shock or fire.Operating methodCautionDo not forcefully pull the paper outduring printing.It can cause damage to themachine.When printing large quantities, the bottom part of thepaper output area may get hot. Do not allow children totouch.Children may be burned.Be careful not to put your handbetween the machine and papertray.You may get injured.When removing jammed paper, do not use tweezers orsharp metal objects.It can cause damage to the machine.Do not block or push objects into theventilation opening.This could result in elevated componenttemperatures which can cause damage or fire.Do not allow too many papers to stack up in the paper output tray.It could cause damage to the machine.Use care to avoid paper cuts when replacingpaper or removing jammed paper.You may get hurt.This machine's power interception device is the power cord.To switch off the power supply, remove the power cord from theelectrical outlet.Installation / MovingWarningDo not place the machine in an area with dust, humidity or water leaks.This could result in electric shock or fire.CautionWhen moving the machine, turnthe power off and disconnect allcords; then lift the machine withat least two people.The machine could fall, causing human injuryor machine damage.Do not put a cover over the machine or place it in an airtightlocation, such as a closet.If the machine is not well-ventilated, this could result in fire.Do not place the machine on an unstablesurface.Make sure you plug the power cord into a grounded electrical outlet.Otherwise, this could result in electric shock or fire.