Purpose:To print various types of reports and lists.The reports are printed in the paper size specified in Printer Settings. The default is A4 or Letter.Values:TCP/IP SettingsPurpose:To display the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol.Values:Printer MaintenanceThe Printer Maintenance tab includes the System Settings, Paper Density, Adjust BTR, Adjust Fuser, Registration Adjustment, Adjust Altitude, ResetDefaults, Non-Dell Toner, Initialize PrintMeter, Web Link Customization, TCP/IP Settings, EWS, and Set Password pages.System SettingsPurpose:To configure the basic printer settings.Values:Printer Settings Click the Start (1) button to print the printer settings page.Device Settings Click the Start (2) button to print the detailed settings page.Job History Click the Start (3) button to print the job history report.Error History Click the Start (4) button to print the error history report.Color Test Page Click the Start (5) button to print the color test page.IP Address Mode Displays the settings for the IP address.IP Address Displays the printer's IP address.Subnet Mask Displays the subnet mask.Gateway Address Displays the gateway address.NOTE: Values marked by an asterisk (*) are the factory default menu settings.Power SaverTimer Mode 1*11-30 min Specifies the amount of time before the printer enters the Power Saver Timer Mode 1 (sleep mode) after a printjob is complete.3 min*