Using Your Projector 33VGA-B—Use and to enable or disable VGA-B input.S-VIDEO—Use and to enable or disable S-Video input.C OMPOSITE VIDEO—Use and to enable or disable Composite Video input.HDMI—Use and to enable or disable HDMI input.NOTE: You cannot disable your current input source. At anytime, a minimum oftwo input sources have to be enabled.PICTURE (in PC Mode)Using the Picture menu, you can adjust the display settings of your projector. ThePicture menu, provides the following options:VIDEO MODE —Allows you to optimize the display image: Presentation, Bright,Movie, sRGB (provides more accurate color representation), and Custom (setyour preferred settings). If you adjust the settings for Brightness, Contrast,Saturation, Sharpness, Tint, and Advanced, the projector automatically switchesto Custom.NOTE: If you adjust the settings for Brightness, Contrast, Saturation,Sharpness, Tint, and Advanced the projector automatically switches to Custom.B RIGHTNESS—Use and to adjust the brightness of the image.C ONTRAST—Use and to adjust the display contrast.A DVANCED —Press on the control panel or press Enter button on the remotecontrol to activate Picture Advance Menu. See "PICTURE ADVANCED" onpage 35.