34 Using Your ProjectorPICTURE (in Video Mode)Using the Picture menu, you can adjust the display settings of your projector. ThePicture menu provides the following options:VIDEO MODE —Allows you to optimize the display image: Presentation, Bright,Movie, sRGB (provides more accurate color representation), and Custom (setyour preferred settings).If you adjust the settings for Brightness, Contrast,Saturation, Sharpness, Tint, and Advanced the projector automatically switchesto Custom.NOTE: If you adjust the settings for Brightness, Contrast, Saturation,Sharpness, Tint, and Advanced the projector automatically switches to Custom.B RIGHTNESS—Use and to adjust the brightness of the image.C ONTRAST—Use and to adjust the display contrast.S ATURATION—Allows you to adjust the video source from black and white to fullysaturated color. Press to decrease the amount of color in the image and toincrease the amount of color in the image.S HARPNESS—Press to decrease the sharpness and to increase thesharpness.TINT —Press to increase the amount of green in the image and to increasethe amount of red in the image (available for NTSC only).A DVANCED —Press on the control panel or press Enter button on the remotecontrol to activate Picture Advance Menu. See "PICTURE ADVANCED" below.NOTE: Saturation, Sharpness, and Tint are only available when input source isfrom Composite or S-Video.