8 4Copy ingLoading Paper for CopyingThe instructions for loading print materials are the same whether you are printing, faxing,or copying. For further details, see page 17 for loading paper in the paper tray and page 54for loading paper in the Bypass tray.Selecting Paper TrayAfter loading the print media for copy output, you have to select the paper tray you will usefor the copy job.1Press Copy Setup” appears on the top line ofthe display.2Press the scroll button (or) to display “SelectTray” on the bottom line.3Press 4Press the scroll button (or) until the paper tray you want appears on the display.You can select from Tray1, Tray2(option) and Bypass. If you do not install the optionalTray 2, the Tray2(option) menu item will not appear on the display.5Press 6To return to Standby mode, press .Preparing a DocumentYou can use the scanner glass or the Automatic Document Feeder (ADF) to load an originaldocument for copying, scanning and sending a fax. Your ADF can load up to 50 documentsfor one job. Using the scanner glass, you can load one sheet at a time.When you use the ADF:•Do not load documents smaller than 5.59 by 5.83 in. (142 by 148 mm) or larger than8.5 by 14 in. (216 by 356 mm).•Do not attempt to feed the following types of documents:–Carbon-paper or carbon-backed paper–Coated paper–Onion skin or thin paper
