9 2Copy ing2-side CopyingYou can copy a 2-sided document on one page of A4, Letter, or Legal-sized paper.When you copy using this feature, the machine prints one side on the upper half of thepaper and the other side on the lower half without reducing the original. This feature ishelpful for copying a small-sized document, such as a name card.If the original document is larger than the printable area, some portions may not be printed.This special copy mode can be applied when you load a document using only the scannerglass. If a document is detected in the ADF, the 2 Sided copying feature does not work.NOTE:You cannot adjust the copy size using the (▼or▲) button for 2Sided copying.To make the 2 Sided copying:1Load the document to be copied on the scanner glass, and close the cover.2Press .3Press or the scroll button (or) until “2 Sided” displays on the bottomline.4Press 5If necessary, customize the copy settings including the number of copies, copy size,contrast, and image quality by using the operator panel buttons. See "Setting CopyOptions" on page 88.6Press to begin copying.Your machine begins scanning the front side.7When “Set Backside” displays on the bottom line, open the document cover andflip the document over with the second side facing down. Close the document cover.NOTE:If you press the button or if no buttons are pressed for about 30seconds, the machine cancels the copy job and returns to Standby mode.8Press again.
