90 Installing System OptionsInstalling a Hard DriveNOTICE: When a replacement hot-pluggable hard drive is installed and the server module is powered on, the harddrive automatically begins to rebuild. Make absolutely sure that the replacement hard drive is blank or containsdata that you wish to have over-written. Any data on the replacement hard drive is immediately lost after the harddrive is installed.NOTICE: Not all operating systems support hot-plug drive installation. See the documentation supplied with youroperating system.1 Open the hard-drive carrier handle. See Figure 3-21.Figure 3-21. Installing a Hard Drive2 Insert the hard-drive carrier into the drive bay.3 Close the hard-drive carrier handle to lock it in place.Removing a Hard DriveNOTICE: Not all operating systems support hot-plug drive installation. See the documentation supplied with youroperating system.1 Take the hard drive offline and wait until the hard-drive indicator codes on the drive carrier signal thatthe drive may be removed safely. See Figure 1-4.When all indicators are off, the drive is ready for removal.See your operating system documentation for more information on taking the hard drive offline.1 server module 2 hard drive 0 3 carrier handle4 hard drive 13 214
