Printer setupPrinter Setup displays the following selections:• Defaults (U.S.*, Non-U.S.)• Page Count• Perm Page Count• Serial Number• Engine Setting (1 through 4)• Model Name• Configuration ID• Edge to Edge• Par S Strobe Adj (only displayed if the printer has a standard parallel port)DefaultsThe value of this setting determines whether the printer uses the U.S. or Non-U.S. factory default value for thesettings listed below:If the value of a setting is changed, then Submitting Changes... displays. Press to exit the Defaults settingand return to the Printer Setup menu.Printed Page Count (Page Count)The value of this setting gauges the amount of usage on the printer. The Page Count setting’s value will equalthe values of the Picked Sides meter. After all print tests have been completed, the value will reset to “0.”Note: The value of this setting cannot be changed manually.Press to exit the Page Count setting and return to the Printer Setup menu.Permanent Page Count (Perm Page Count)The value of this setting indicates the total number of pages that have been printed. After all print tests havebeen completed, the value will reset to “0.”Note: The Permanent Page Count’s value cannot be reset.Press to exit the Permanent Page Count and return to the Printer Setup menu.Serial NumberThe serial number can only be viewed and cannot be changed.To view the serial number:1. Select Serial number from PRINTER SETUP.2. Press Return to return to PRINTER SETUP.Device Setting U.S. value Non-U.S. valuePaper sizes Letter A4Envelope size 10 DL EnvelopePCL Symbol Set PC-8 PC-850PPDS Code Page 437 850Universal Units of Measure Inches Millimeters3-12
