Alignment and Troubleshooting4-12Service Manual1. Open and close the front cover. The jammedpaper automatically exits the printer.If the paper does not exit, go to the next step.2. Gently pull the paper out of the output tray.3. If you cannot see the paper in the output tray orthe paper does not move when pulled, open therear door.4. If you see the jammed paper, push the two bluepressure levers down and remove the paper.Skip to step 9.If you do not see the paper, go to the next step.5. Fully open the rear door, as shown.4.1.2.5 Paper Exit Jam
