Dell 3008WFP User Manual

Also see for 3008WFP - UltraSharp - 30" LCD Monitor: Setup guide Specifications Brochure

Dell 3008WFP User Manual Manual pdf 17 page image

Using the On-Screen Display (OSD) MenuAccessing the Menu SystemMain Menu for Analog (VGA) InputorMain Menu for non Analog (non VGA) InputororBPicture by Picture(PBP) SelectUse this button to activate Picture by Picture (PBP) mode adjustment.COSD Menu/SelectUse the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See Accessing the Menu System.DBrightness/ContrastHot KeyUse this button for direct access to the "Brightness" and "Contrast" control menu.EDown (-) and Up (+)Use these buttons to navigate and adjust the slider-bar (decrease/increase ranges) controls in the OSD.FAuto AdjustUse this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self-adjuststo the current input:Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune yourmonitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under DISPLAY SETTINGS.NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.GPower button(with power lightindicator)Use the Power button to turn the monitor on and off.The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves thosechanges. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.1. Push the MENU button to launch the OSD menu and display the main menu.