Diagnostic aids 3-5To change the value of this setting:1. Touch Panel Menus from the Configuration Menu. [setting's current value] appears on the touch-screen.2. Touch or to scroll through the setting's other possible values.3. Touch Back to cancel and return to the Configuration Menu.4. Touch Submit to save the change.PPDS EmulationThe value of the PPDS Emulation menu item determines if a device can recognize and use the PPDSdatastream. The current value of this setting appears in parentheses to the right of the setting on theConfiguration Menu screen.The following table indicates how the value of this setting affects the user default value for the SmartSwitch andPrinter Language settings:To change the value of this setting:1. Touch PPDS Emulation from the Configuration Menu. [setting's current value] appears on thetouch-screen.2. Touch or to scroll through the setting's possible values.3. Touch Back to cancel and return to the Configuration Menu.4. Touch Submit to save the change.Download EmulsThis setting enables you to disable a Downloadable emulator (DLE) that is installed on the MFP. The setting forthis menu setting is disabled.Note: The DLE is re-enabled automatically after two PORs.To change the value of this setting:1. Touch Download Emuls from the Configuration Menu. [setting's current value] appears on thetouch-screen.2. Touch or to scroll through the setting's possible values.3. Touch Back to cancel and return to the Configuration Menu.4. Touch Submit to save the change.Value ofPPDSEmulationsettingResulting value ofSmartSwitch setting(all ports)Resulting value for Printer Language settingsActivate Off PPDS EmulationNote: You can still switch languages on the operator panel or throughthe PJL ENTER LANGUAGE command.Deactivate On Printer's factory default value
