42 | OperationSettingsOnly available options are displayed.User settings are not protected by default. You can enable the password through the User Passwordsetting.Table 6 displays the options that can be changed by the user.Table 6. SettingsDescription Available Settings Default SettingChange Language [English] [French] [German] [Spanish] [Japanese][Simplified Chinese] [Russian] [Korean][Traditional Chinese]EnglishUser Password [Enabled] [Disabled]If Enabled, the default password is USER.NOTE: If you enter an incorrect password, themessage “Wrong Password” appears. Press anybutton to return to the password screen and retrythe password.DisabledAudible Alarms [Enabled] [Disabled]NOTE: If you disable audible alarms, it takes effectinstantly and remains disabled, even after a powercycle. This differs from the mute feature where thehorn is temporarily silenced on any button press,but turns on again if a new alarm is triggered.EnabledSet Date and Time Set Month, Day, Year, Hours, Minutes, and SecondsDate: mm/dd/yyyyTime: hh:mm:ssNOTE: The date format is dependent on thelanguage selection.NOTE: Time is a 24-hour clock.01/01/200912:00:00Control Commands from SerialPort[Enabled] [Disabled]If Enabled, control commands are accepted throughthe serial port, USB ports, or option card.If Disabled, configuration and load controlcommands are restricted to LCD only.EnabledOutput Voltage [200V] [208V] [220V] [230V] [240V][Auto-sensing]Auto-sensingOutput Frequency [50Hz] [60Hz] [Auto-sensing] Auto-sensing