112 Adding and Replacing PartsOptical DriveCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.Removing the Optical Drive1 Follow the procedures in "Before You Begin" on page 107.2 Turn the computer over.3 Remove the locking screw from the optical drive.4 Using a plastic scribe, push the notch to release the optical drive from the bay.5 Slide the optical drive out of the bay.Replacing the Optical Drive1 Slide the optical drive into the bay.2 Replace and tighten the locking screw.1 optical drive 2 locking screw 3 notch312Downloaded from www.Manualslib.com manuals search engine
