14 WARNING: Safety InstructionsYou can also take the following steps to prevent damage from electrostaticdischarge:• When unpacking a static-sensitive component from its shipping carton, donot remove the component from the antistatic packing material until youare ready to install the component. Just before unwrapping the antistaticpackage, be sure to discharge static electricity from your body.• When transporting a sensitive component, first place it in an antistaticcontainer or packaging.• Handle all electrostatic sensitive components in a static-safe area. Ifpossible, use antistatic floor pads and work bench pads.SAFETY: Battery DisposalYour system may use a nickel-metal hydride (NiMH), lithiumcoin-cell, and/or a lithium-ion battery. The NiMH, lithium coin-cell, and lithium-ion batteries are long-life batteries, and it ispossible that you will never need to replace them. However, shouldyou need to replace them, see the instructions included in thesection "Configuring and Managing RAID" on page 77.NOTE: Do not dispose of the battery along with household waste. Contact yourlocal waste disposal agency for the address of the nearest battery deposit site.NOTE: Your system may also include circuit cards or other components thatcontain batteries. These batteries too must be disposed of in a battery deposit site.For information about such batteries, see the documentation for the specific card orcomponent.Taiwan Battery Recycling Mark
