80 Configuring and Managing RAIDNOTE: You can access multiple controllers through the BIOS Configuration Utilityby pressing .NOTE: You can access PERC 5 and PERC 6 controllers from the same BIOS if thePERC 5 firmware version is 5.1.1-0040 or later. You need to verify if you are currentlyset to edit the PERC 5 or PERC 6 adapter.Exiting the Configuration UtilityTo exit the BIOS Configuration Utility, press at any menu screen.If there is only one controller, then a dialog box displays to confirm yourchoice. Select OK to exit and press .If multiple controllers are present, then the key brings you to theController Selection screen. Press again to reach the exit screen.A dialog box displays to confirm your choice. Select OK to exit and press.Menu Navigation ControlsTable 6-1 displays the menu keys you can use to move between the differentscreens in the BIOS Configuration Utility.Table 6-1. Menu Navigation KeysNotation Meaning and Use Exampleright-arrowkeyUse the right-arrow key to open a submenu, movefrom a menu heading to the first submenu, or moveto the first item in that submenu. If you press theright-arrow key at a menu heading, the submenuexpands. Press it again to go to the first item in thesubmenu. The right-arrow key is also used to close amenu list in a popup window. Word wrap issupported.StartProgramsleft-arrowkeyUse the left-arrow key to close a submenu, movefrom a menu item to the menu heading for thatitem, or move from a submenu to a higher levelmenu. If you press the left-arrow key at a menuheading, the submenu collapses. Press it again to goto the higher-level menu. Word wrap is supported.Controller 0Disk Group 1
