68 Using CardsMedia memory cards are generally marked with a symbol (such as a triangle or an arrow) or a label toindicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If cardorientation is not clear, see the documentation that came with the card.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the ProductInformation Guide.To install a media memory card:1 Hold the card with the top side of the card facing up.2 Slide the card into the slot until the card is completely seated in its connector.If you encounter too much resistance, do not force the card. Check the card orientation and try again.The computer recognizes the media memory card and automatically loads the appropriate device driver.If the configuration program tells you to load the manufacturer's drivers, use the CD that came with themedia memory card, if applicable.Removing a Media Memory CardCAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the ProductInformation Guide.NOTICE: Use the media memory card configuration utility (click the icon in the taskbar) to select a card andstop it from functioning before you remove it from the computer. If you do not stop the card in the configurationutility, you could lose data.Press the card in to release it from the card reader so that it is partially ejected, and remove the card.1 5-in-1 media memory card slot 2 media memory card12
