Replacing the Display Hinges | 67Replacing the Display HingesWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in"Before You Begin" on page 11. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Align the screw holes on the display hinges with the screw holes on the displaybackcover.2 Replace the screws that secure the display hinges to the display back-cover.Postrequisites1 Replace the display bezel. See "Replacing the Display Bezel" on page 65.2 Replace the display assembly. See "Replacing the Display Assembly" on page 60.3 Follow the instructions from step 3 to step 6 in Replacing the Palm Rest.4 Replace the optical drive. See "Replacing the Optical Drive" on page 24.5 Replace the hard drive(s). See “Replacing the Hard Drive(s)” on page 28.6 Replace the battery pack. See "Replacing the Battery Pack" on page 17.7 Replace the fans cover. See "Replacing the Fans Cover" on page 30.8 Replace the base cover. See "Replacing the Base Cover" on page 15.9 Replace any card or blank that you removed from the Media-Card Reader.10 Follow the instructions in "After Working Inside Your Computer" on page 13.