w w w . d e l l . c o m | s u p p o r t . d e l l . c o mGetting Connected 1095 Tap the Wireless Ethernet icon.6 On the Wireless tab, tap New Settings.7 Enter the SSID next to Network Name, and select whether thenetwork connects to the Internet or work.8 Tap the Authentication tab to enable or disable WEP settings,depending on your network type.9 Tap OK.When your device successfully connects to the network, yourconnection status appears under Wireless Networks.Creating a VPN Connection1 Tap the Start button→ Settings→ Connections tab→ Connections.2 Tap Add a new VPN server connection.3 Enter a name for the connection, such as your company's name.4 In the Host name/IP field, enter the VPN server name or IP address.5 Next to VPN type, tap IPSec or PPTP, depending on the type ofauthentication that you want to use with your device.If you are unsure about which option to select, ask your networkadministrator.6 Tap Next.7 Enter your username, password, and, if required, domain.8 Install the network card driver, if required.See the documentation that came with your network card.9 Insert the network card into your device.• If a network with a broadcast SSID is detected, the wirelessnetwork icon, , and the New Network Detected bubbleappear in the navigation bar. Go to step 10.
