Wireless network setup• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,TKIP, AES)• Network Password: Enter the encryption Network Password value.• Confirm Network Password: Confirm the encryption NetworkPassword value.• WEP Key Index: If you are using WEP Encryption, select the appropriateWEP Key Index.The wireless network security window appears when the access point hassecurity enabled.• You can start to build Wi-Fi Direct by using Dell Printer Manager (see"Setting up Wi-Fi Direct" on page 131).• Network Name(SSID): The default Network Name is the model nameand the maximum length is 22 characters (not including "Direct-xx-").• Network Password is the numeric string, and the size is 8 ~ 64characters.When the wireless network settings are completed, disconnect the USB12 cable between the computer and machine.Wireless network set up is completed. After the installation is finished,13 click Quit.After completing the wireless network connection, you need to install amachine driver to print from an application (see "Installation for Mac" onpage 98).Ad hoc via USB cableIf you do not have an access point (AP), you may still connect the machinewirelessly to your computer by setting up an ad hoc wireless network byfollowing these simple directions.Items to prepare• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• USB cableCreating the ad hoc network in MacMake sure that the machine is connected to your network and powered1 on.Insert the supplied software CD into your CD/DVD drive.22. Using a Network-Connected Machine 128
