Wired network setup1402. Using a Network-Connected Machine9 Enter the password and click OK.10 Select Network Connection on the Printer Connection Type and clickSet IP Address button.11 Click the icon (third from the left) in the SetIP window to open theTCP/IP configuration window.12 Enter the machine’s new information into the configuration window. Ina corporate intranet, you may need to have this information assigned bya network manager before proceeding.Find the machine’s MAC address from the Network Configuration Report(see "Printing a network configuration report" on page 138) and enter itwithout the colons. For example, 00:15:99:29:51:A8 becomes0015992951A8.13 Click Apply, and then click OK. The machine will automatically print theNetwork Configuration Report. Confirm that all the settings arecorrect.IPv4 configuration using SetIP (Linux)Before using the SetIP program, disable the computer firewall from SystemPreferences or Administrator.The following instructions may vary from your model or operating systems.1 Open /opt/Dell/mfp/share/utils/.2 Double-click the SetIPApplet.html file.3 Click to open the TCP/IP configuration window.4 Enter the machine’s new information into the configuration window. Ina corporate intranet, you may need to have this information assigned bya network manager before proceeding.Find the machine’s MAC address from the Network Configuration Report(see "Printing a network configuration report" on page 138) and enter itwithout the colons. For example, 00:15:99:29:51:A8 becomes0015992951A8.5 The machine will automatically print the Network ConfigurationReport.
