1262. Using a Network-Connected MachineIPv6 configurationIPv6 is supported properly only in Windows Vista or higher.If the IPv6 network seems to not be working, set all the network setting tothe factory defaults and try again.In the IPv6 network environment, follow the next procedure to use the IPv6address.9From the control panel1 Connect your machine to the network with a network cable.2 Turn on the machine.3 Print a Network Configuration Report that will check IPv6 addresses(see "Printing a network configuration report" on page 117).4 Select Start > Control Panel > Printers and Faxes.5 Click Add a printer in the left pane of the Printers and Faxes windows.6 Click Add a local printer in the Add Printer windows.7 The Add Printer Wizard window appears. Follow the instructions in thewindow.If the machine does not work in the network environment, activate IPv6.Refer to the next section followed by.Activating IPv61 Press the (Menu) button on the control panel.2 Press Network > TCP/IP (IPv6) > IPv6 Activate.3 Select On and press OK.4 Turn the machine off and turn it on again.5 Reinstall your printer driver.
