396 FaxingFILE LOCATION: C:\Users\fxstdpc-admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fmD E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LYFor details about loading a document, see "Loading an Original Document."2 Press the (Fax) button.3 Adjust the document resolution to suit your fax needs. (For details, see"Adjusting the Document Resolution." For adjusting the contrast, see"Adjusting the Document Contrast.")4 Press button until Delayed Start is highlighted, and then press the(Set) button.5 Press or button until On is highlighted, and then press the (Set)button.6 Enter the start time using the numeric keypad or press or button, andthen press the (Set) button.7 Press or button until Fax to is highlighted, and then press the(Set) button.8 Ensure that Keypad is highlighted, and then press the (Set) button.9 Enter the number of the remote machine using the numeric keypad, and thenpress the (Set) button.You can also use speed or group dial numbers. (For details, see "AutomaticDialing.")10 Press the (Start) button to scan data.Once Delayed Start mode is activated, your printer stores all of thedocuments to be faxed into its memory and sends them at the specified time.After faxing in the Delayed Start mode is complete, the data in the memory iscleared.NOTE: If you turn off and on the printer, the stored documents are sent assoon as the printer is activated.NOTE: If the specified start time overlaps with the time periods for theavailable time or the Fax service, the printer cannot send the delayed fax atthe specified time. (For details, see "Set Available Time" for the Availabletime and "Function Enabled" for the Fax service.)Sending a Fax from the Driver (Direct Fax)You can send a fax directly from your computer by using the driver.NOTE: Only black and white faxes can be sent using Direct Fax.
